Mechanical engineering
Part geometry, fixtures, machine layout and manufacturing requirements considered together.
ENGINEERING. MANUFACTURING. SOLUTIONS.
Built for your process.
Ready for what’s next.
Custom machines, industrial automation and software. From mechanical design to PLC control, we see your production as a whole.
GEBZE, KOCAELİ / TÜRKİYEFROM REQUIREMENT TO PRODUCTION
CONNECTED CAPABILITIES
Electrical & controls
Panel design, PLC logic and operator interfaces coordinated around the process.
Industrial software
Machine data, system communication and production visibility connected through software.
FROM REQUIREMENT TO SOLUTION
Projects in focus.
Automatic Clip Check Station
Industrial automation and manufacturing technologies. / Automatic part feeding, leak testing, and camera-based visual quality control on production lines.
The machine, which integrates automatic feeding, precision leak testing, and camera-assisted quality control processes into a single system, has been revised to enhance production efficiency and ensure product quality.
View project ↗
End of Line Marking Machine
Hydraulic hose production / Braid quality control after wire winding and marking of defective areas prior to coating.
Our laser marking machine, integrated into the output of the wire-winding machine used in hydraulic hose production, was developed to mark areas containing defects—such as wire breakage, skipped wires, or braiding irregularities—prior to the coating process. This facilitates the tracking of defective sections during production and their identification during subsequent processing stages.
View project ↗
Connector Assembly Machine
Connector and fastening component manufacturing / Multi-station precision assembly, leak testing, quality inspection using image processing, laser marking, and automatic product sorting.
A 10-station connector, O-ring, ring and metal clip assembly and inspection machine has been retrofitted. The process combines manual pre-assembly, servo-controlled assembly, leak testing, lubrication, camera inspections, laser marking and automatic sorting. Station results determine product status: conforming products are marked OK, while non-conforming products are marked NOK with the failure reason. Products are then directed to separate bins.
View project ↗01 / OUR SOLUTIONS
Engineering in
every detail.
From a mechanical part to industrial data. Explore the expertise your project needs.
01
Custom machine manufacturing
Mechanical design, machine building and system integration around your production process.
Explore solution
02
Industrial automation
Connecting machines, control systems and production workflows.
Explore solution
03
Electrical control panels
Project-specific panel design, component layout and electrical panel manufacturing.
Explore solution
04
PLC programming
Control logic for machine sequences, process operation and fault handling.
Explore solution
05
HMI and SCADA software
Clear operator interfaces for process visibility, alarms and production monitoring.
Explore solution
06
Machine revision and retrofit
Updating mechanical, electrical and control systems around the needs of existing equipment.
Explore solution
07
Spare parts manufacturing
Mechanical replacement parts based on technical drawings or sample assessment.
Explore solution
08
OPC UA and industrial software
Industrial data integration between machines and higher-level applications.
Explore solution
09
Precision machining
Mechanical parts made to your drawings, from prototypes to production quantities.
Explore solutionCONTROL. CONNECTIVITY. SOFTWARE.
Automation technologies.
The list covers technologies used in projects and options assessed according to the application and existing infrastructure. It is curated from the management panel for each confirmed scope.
PLC, control & HMI
SiemensMitsubishi ElectricOmronRockwell AutomationSchneider ElectricBeckhoffB&RWAGOPhoenix ContactABBBosch RexrothDeltaLS ElectricCODESYSTwinCATTIA PortalSIMATIC HMI / WinCCSysmac StudioFactoryTalk Optix / ViewEcoStruxure Machine Expert
Motion, drives & robotics
Siemens SINAMICSMitsubishi MELSEC / MR-JOmron servo systemsYaskawaSEW-EURODRIVELenzeKollmorgenParkerDanfoss DrivesFestoSMCBosch RexrothABB RoboticsFANUCKUKAYaskawa MotomanKawasaki RoboticsDENSO RoboticsStäubliEpson RobotsUniversal Robots
Sensors, vision & measurement
KeyenceCognexSICKifmBalluffTurckBanner EngineeringLeuzePepperl+FuchsBaumerPanasonic IndustryOmron SensorsKistlerMicro-EpsilonDatalogicZebraLMI Technologies
Pneumatics, industrial components & safety
FestoSMCParkerCamozziAirtacSchunkZimmer GroupPilzSICK SafetyEuchnerSchmersalWeidmüllerRittalMurrelektronikWielandFinder
Industrial software, connectivity & data
OPC UAProfinetEtherNet/IPEtherCATModbus TCPIO-LinkAS-iMQTTTCP/IPSQLMicrosoft .NETNode-REDIgnitionAVEVA System PlatformKepwareGrafanaInfluxDB
PETRA OTOMASYON / ENGINEERING & MANUFACTURING02 / ABOUT PETRA
Connected expertise.
Practical solutions.
Petra Otomasyon brings custom machine building, industrial automation, electrical panels and industrial software together under one engineering approach.
Based in Gebze, Türkiye, we consider mechanical manufacturing, controls and production data as connected parts of a system. We also work on existing machine upgrades, replacement parts and precision machining requirements.
Discover PetraAPPLICATION AREAS
Different industries.
Process-focused engineering.
We assess application needs against the technical requirements of each industry.
Automotive & components
Assembly sequences, part verification, fixtures and process traceability requirements.
White goods & components
Product variations, component assembly and functional test requirements.
Food & packaging
Conveying, packaging, identification and data integration needs; hygiene and material requirements assessed for each application.
General manufacturing
Machine upgrades, mechanical parts, electrical panels and production monitoring needs.
YOUR NEXT PROJECT
Let’s engineer
what’s next.
Tell us about your process and what you need. We’ll discuss a suitable approach.
GET IN TOUCH+90 531 814 08 06info@petraotomasyon.comVISIT US
Arapçeşme Mah. 1083. Sok. No: 1/A, Gebze / Kocaeli